Member Login

Email
Password
Forget PasswordRegister

Application Videos

ANSYS Discovery Live for Parametric Structural Analysis

Observe deformation and changes in stress when drilling holes in H-shaped steel that undergoes bending deformation. Each time you change the position or number of holes, you can get result immediately.

Contact us for more details!

^TOP

 

ANSYS Discovery Live for Fluid Analysis of car air conditioner

This is an fluid analysis inside passenger compartment with a car air conditioner. With Discovery Live, analysis results can be viewed immediately, and the results can be examined using various display methods. In addition, if the fly view mode is used, the analysis results can be seen from the driver's eyes, allowing deeper consideration of the results.

Contact us for more details!

^TOP

ANSYS Discovery Live for Fluid analysis around F1 rear wing

This video demonstrate the Fluid Analysis in ANSYS Discovery Live. This simulation was to find out the effect of changing the angle of the small flap of the simplified F1 rear wing to the drag force and the downforce generated. The angle of the small flap of the rear wing changes from initial (0 degree) to 35 degree and back to 0. With ANSYS Discovery Live, the result of the simulation was shown almost instantaneously. The graph represent the changes in the drag force and downforce of the rear wing.

Contact us for more details!

^TOP

ANSYS Discovery Live for Thermal Analysis of Mold Cooling

This is a transient heat transfer analysis that examines how to efficiently cool the mold. With Discovery Live, temperature results can be obtained immediately by changing the shape and arrangement of the cooling water pipe.

Contact us for more details!

^TOP

ANSYS Discovery Live for Modal Analysis of bracket

Modal analysis (eigenvalue analysis) of a bracket with a weight at the tip. By adding a supporting structure to the bracket, you can observe how eigenvalues ​​and mode shapes change.

Contact us for more details!

^TOP

ANSYS Discovery Live for Topology optimization

Real-time analysis tool, ANSYS Discovery Live has added a “topology optimization (phase optimization)” function. If you set the load conditions, it will automatically find an optimally lightweight shape.Since the generated stress is calculated at the same time, the strength can be checked. Optimized shape data can be retrieved immediately as a CAD data.

Contact us for more details!

^TOP

 

TOP